Posted by Erika Rydberg, Last modified by Erika Rydberg on 06 September 2019 03:09 PM
3D Printers lay down heated plastic in layers to create
The Lulzbot TAZ 5 has a maximum print size of 11.4 x 10.8 x 9.8 inches.
The Ultimaker 2 Extended+ has a maximum print size of 8.8 x 8.8 x 12.0 inches.
The Zortrax M200 has a maximum print size of 7.9 x 7.9 by 7.1 inches.
For the colors we offer for 3D printing please see the images below. Please note we do run out of colors, so when selecting color it is best to submit your top two
form. We currently offer two materials; PLA and ABS.We use ABS exclusively with our Zortrax printer, and PLA with our Taz and Ultimaker.
$3 set up fee per build
+ 4¢ per gram of weight* (material cost)
+ 50¢ per hour of print time
* Includes support material
Please follow the instructions and submit your print(s) to us online at https://campus.plymouth.edu/it/print-depot/ or if you're on campus you can find the same page via go/
Please take note - if your file is over 20 MB you will have to upload it to OneDrive following the instructions in order to submit your file(s) to the Print Depot.
An outline of the instructions for OneDrive
1. Upload your file to your Microsoft OneDrive Account
2. Once uploaded click on your file and select "get link"
3. Select "edit link - no sign-in required" in the
4. Paste the URL from the box that appears in the box below.
For any questions about the Print Depot please email firstname.lastname@example.org and see our brochure below also available at the Help Desk.